Altronix ACM8CB

Product Overview

Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.

This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Main Features
8 Output Access Power Controller Module.
Converts one (1) 12 to 24 volt AC or DC input into eight (8) PTC power outputs.
Individually selectable Fail-Safe/Fail-Secure outputs.
Fire alarm disconnect is selectable by output.
UL and cUL listed.

General Information
Name: Altronix ACM8CB Access Power Controller, 8 PTC Class 2 Relay Outputs, Board, Altronix Corporation, Altronix Category: Altronix, Access Control, Power Products, Access Power Controllers