NAPPIR1710
SKU
NAPPIR1710
$33.00
Quick Overview
Product Overview
70ft x 60ft Lookdown ASIC PIR
70ft x 60ft Lookdown ASIC PIR
Product Overview
Animal immunity & built-in temperature sensors. Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify Napco sensor technology’s innovation, increasing dependability without compromising intruder "catch" sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45' (13.7m) range. Or, the original model PIR1680, has a 50' (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signatures—enabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also Feature a built-in temperature sensor – at no additional charge—so you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or décor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.
Features:
Broad range and wide angle coverage suitable for most residential & commercial installations:
PIR1680PT 45 x 45' (13.7 x 13.7m)
PIR1680 50 x 50' (15.2m x 15.2m)
Look-down/creep zone
Pet/animal immunity up to 65lbs.
Insect-safeguarded enclosure
Unsurpassed PIR False Alarm Rejection
Active Self-Test Mode
Optimized field-of-view with custom-engineered aspheric optics
Superior RFI-/EFI-/lightning-shielded protection
Critical Range Control
Automatic Temperature Compensation
Fast, flexible mounting
Tamper/Vandalism Supervision
Added False Alarm Prevention Features
Specifications:
Microprocessor: 2K ROM with A-D Converter
Operating temperature*: -10 to +50 degrees C (14° to 122° F)
Freeze damage alert: 40°F (4°C)
Heat damage alert: 90°F (32°C)
Mounting: Wall or corner, 12' (3.6m) max.; For pet/animal applications 7' (2.1m) is recommended.
Output relay: Form A; normally closed
Relay time: Approx. 3 seconds
Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
Multi-mode Trouble Output (Open collector)
Self-Test Interval: 11 - 16 hrs.
Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel.
Current drain: 28mA (idle/alarm) at 12VDC (nominal)
Dimensions: 3.3"H x 2.5"W x 1.9"D (8.4 x 6.4 x 4.8 cm) (HxWxD)
Shipping weight: 5 oz (142 gm)
General Information
Name: NAPPIR1710
Category: Access Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads
Animal immunity & built-in temperature sensors. Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify Napco sensor technology’s innovation, increasing dependability without compromising intruder "catch" sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45' (13.7m) range. Or, the original model PIR1680, has a 50' (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signatures—enabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also Feature a built-in temperature sensor – at no additional charge—so you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or décor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.
Features:
Broad range and wide angle coverage suitable for most residential & commercial installations:
PIR1680PT 45 x 45' (13.7 x 13.7m)
PIR1680 50 x 50' (15.2m x 15.2m)
Look-down/creep zone
Pet/animal immunity up to 65lbs.
Insect-safeguarded enclosure
Unsurpassed PIR False Alarm Rejection
Active Self-Test Mode
Optimized field-of-view with custom-engineered aspheric optics
Superior RFI-/EFI-/lightning-shielded protection
Critical Range Control
Automatic Temperature Compensation
Fast, flexible mounting
Tamper/Vandalism Supervision
Added False Alarm Prevention Features
Specifications:
Microprocessor: 2K ROM with A-D Converter
Operating temperature*: -10 to +50 degrees C (14° to 122° F)
Freeze damage alert: 40°F (4°C)
Heat damage alert: 90°F (32°C)
Mounting: Wall or corner, 12' (3.6m) max.; For pet/animal applications 7' (2.1m) is recommended.
Output relay: Form A; normally closed
Relay time: Approx. 3 seconds
Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
Multi-mode Trouble Output (Open collector)
Self-Test Interval: 11 - 16 hrs.
Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel.
Current drain: 28mA (idle/alarm) at 12VDC (nominal)
Dimensions: 3.3"H x 2.5"W x 1.9"D (8.4 x 6.4 x 4.8 cm) (HxWxD)
Shipping weight: 5 oz (142 gm)
General Information
Name: NAPPIR1710
Category: Access Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads
- - Warranty Provided by Manufacturer
- - Allow 3-5 Days Before Shipping
